Vinculum-II Tools
Vinculum Tools
Precompiled F/ware
Sales Network
Web Shop
Contact Us




  Vinculum VNC1L Application & Utilities

The following page contains sample applications and utilities designed for use with the first generation Vinculum VNC1L USB Host / Slave controller.



  VEVAL  Utility for V-Eval

Program for use with the V-Eval development board.  Can be used as a terminal application, for reprogramming the VNC1L and for monitoring data sent to and from the VNC1L UART.


NOTE: the FT2232 device on the V-Eval board requires FTDI's CDM drivers


Click here to download


  VNC_PROG Programmer for VPROG1

Multi-threaded program for use with the VPROG1 programmer board.  Can be used to program up to 10 VNC1 devices at a time with a specified firmware library.


NOTE: the FT232R device on the VPROG1 board requires FTDI's CDM drivers


Click here to download


  Vinculum Firmware Customiser (V1.1b)

Application to modify firmware default behaviour such as default Baud rate or set short command set.  A user manual is also available.


Click here to download



Application to play music through a VMUSIC1 module (requires TTL-232R-3V3)


Click here to download




© Future Technology Devices International Ltd. 2015