This page allows configuration of the basic device parameters (i.e. Baud rate, data bits, parity, stop bits and flow control). To access more advanced settings, click on the "Advanced " button to display the advanced properties page (shown below).
This page will allow the following parameters to be altered:
· | COM port number
|
· | USB buffer sizes
|
· | Latency timer value
|
· | Read and write timeout values
|
· | Miscellaneous options
|
These options can also be configured as default values via the FTDIPORT.INF file before installation as indicated in FTDIPORT.INF Options. The miscellaneous options are covered in Miscellaneous Options.