Your browser does not allow scripts
Please click here to view a static table of contents without scripts
Clock Data Bits Out on +ve Clock Edge MSB First (no Read)
Return to Introduction  Previous page  Next page
Use if TCK/SK starts at '1'.


This will clock out bits on TDI/DO from 1 to 8 depending on the Length byte. A length of 0x00 will do 1 bit and a length of 0x07 will do 8 bits. The data is sent MSB first. Bit 7 of the data byte is placed on TDI/DO then the TCK/SK pin is clocked. The data will change to the next bit on the rising edge of the TCK/SK pin.