The UMFT60xA and UMFT60xX range of evaluation/development modules incorporate either HSMC/FMC(LPC) connectors for interfacing FTDI’s FT600/FT601 USB 3.0 Superspeed IC with external hardware. The series allows for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT600/FT601. As a daughter card, the UMFT60xx must work with a FIFO master board which has either a FMC or HSMC connector. There are 4 models which provide different FIFO bus interfaces and data bit widths, and they are designed to plug in to most FPGA development platforms supplied by vendors such as Xilinx or Altera. The series supports 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data “burst” rate of up to 400MB/s. For the modules datasheet, please click here. For a full list of features, please refer to the FT60x IC datasheet.

The UMFT602A/X evaluation/development modules feature either HSMC or FMC (LPC) connectors for interfacing FTDI Chip's FT602 32bit FIFO bus to USB 3.1 GEN 1 USB video class (UVC) bridge IC with external hardware. The UMFT602A/X allow for bridging a FIFO bus to a USB3.0 host and evaluating the functionality of the FT602.

As daughter cards, the UMFT602A/X must work with  FIFO master boards which have either a HSMC or FMC connector. There are 2 models which provide different FIFO bus interfaces with 32bit data width.
The modules are designed such that they can plug into most FPGA development platforms supplied by vendors such as Xilinx or Altera. Refer to Ordering Information for module options.

The UMFT602A/X support 2 parallel slave FIFO bus protocols (Multi-Channel FIFO / 245 Synchronous FIFO) with a data “burst” rate of up to 400MB/s. For the modules datasheet, please click here. For a full list of the FT602 features refer to the FT602 datasheet.