 |
Vinculum VNC1L Application & Utilities |
|
|
The following page contains sample applications and utilities designed for use with the first generation Vinculum VNC1L USB Host / Slave controller.
|
|
|
VEVAL Utility for V-Eval |
|
|
Program for use with the
V-Eval development board. Can be used as a terminal application,
for reprogramming the
VNC1L and for monitoring data sent to and from the VNC1L UART.
NOTE: the FT2232 device on the V-Eval board
requires FTDI's CDM drivers
Click here to download
|
|
|
VNC_PROG Programmer for VPROG1 |
|
|
Multi-threaded program for use with the
VPROG1 programmer board. Can be used to program up to 10 VNC1
devices at a time with a specified firmware library.
NOTE: the FT232R device on the VPROG1 board
requires FTDI's CDM drivers
Click here to download
|
|
|
Vinculum Firmware Customiser (V1.1b) |
|
|
Application to modify firmware default behaviour such as default Baud
rate or set short command set. A
user manual
is also available.
Click here to download
|
|
|
VPLAY |
|
|
Application to play music through a
VMUSIC1 module (requires
TTL-232R-3V3)
Click here to download
|
|
|
