The Data Loopback, Data Streamer and API Usage examples are designed to demonstrate the basic D3XX function
calls to open and close a device handle and transfer data in and out on
one or multiple channels of the FT600/601.
The Data Loopback example may be run in conjunction with the same firmware designed to function in an ALTERA or
XILINX FPGA or through your own designs which will read and write data
to the FIFO interface of the FT600/601.
Example source and executable may be downloaded
here
and is explained in detail in AN_375.
The Data Streamer Demo Application is a simple multi-threaded Windows MFC-based application written in C++. It demonstrates FT600/601 performance
in transferring data from the host application to the FIFO master and vice versa. Note that FTDI provides two categories of demo applications – data loopback
and data streaming. Ensure that the data streaming FPGA image is used when using this data streaming application.The Data Streamer example source and executable may be downloaded
here
and is explained in detail in AN_386 and
and AN_387.
The API Usage demo is designed to demonstrate the basic D3XX function calls to open and close a device handle and
transfer data in and out on one or multiple channels of the FT600/601. It also demonstrates how to get device descriptors and use
notification calls. The example may be run in conjunction with loopback firmware designed for the loopback application above.The API Usage demo source and executable may be downloaded
here.
|