Home
Products
ICs
Embedded Video
FT800
FT801
FT81x
BT81x
MCU
FT93x
FT90x
FT51A
USB
FT260
FT600/FT601
FT602
FT-X
FT200XD
FT201X
FT220X
FT221X
FT230X
FT231X
FT234XD
FT240X
FT120
FT121
FT122
FT311D
FT312D
FT313H
Vinculum-II
Vinculum
FT232H
FT2232H
FT4222H
FT4232H
FT4232HP/FT4233HP
FT232R
FT245R
FT2232D
FT232B
FT245B
Discontinued ICs
Cables
Modules
Drivers
Firmware
Support
Android
EVE
MCU
Sales Network
Web Shop
Newsletter
Corporate
Contact Us

 

 

 FT200XD – Full Speed USB to I2C Bridge in 10 pin DFN package

This USB2.0 Full Speed  IC offers a compact bridge to I2C  devices. The device is an I2C slave, capable of operating up to 3.4MBit/s, with low power consumption (8mA). The FT200XD includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an I2C interface.

 Key Hardware Features
  • Single chip USB to I2C interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 2048 byte Multi-Time-Programmable (MTP) memory for storing device descriptors and CBUS I/O configuration.
  • Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
  • 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
  • FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Configurable CBUS I/O pin.
  • Battery Charger detection. May be used by mobile devices to detect the presence of a charger on the USB port for higher current / faster charging of batteries.
  • Device supplied pre-programmed with unique USB serial number.
  • Supports bus powered, self powered and high-power bus powered USB configurations.
  • Integrated +3.3V level converter for USB I/O.
  • True 3.3V CMOS drive output and TTL input.
    • (Operates down to 1.8V with external pull ups and is also 5V tolerant)
  • Configurable I/O pin output drive strength.
  • Integrated power-on-reset circuit.
  • Internal 3.3V/1.8V LDO regulators
  • Low operating current  of  8mA (typical)  and USB suspend current of  125uA (typical) current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • Extended operating temperature range: -40°C to 85°C.
  • Compact Pb-free 10 Pin DFN package (RoHS compliant
Product information

Typical Applications
  • Provide USB port to Microcontroller systems
    • No need to decompose system software, insert USB, and re-validate
  • Motherboard and system monitoring through USB
  • Enable download capability from PC Host systems 
  • Provide USB port to FPGA’s
  • Detecting the presence of USB charging ports for enabling high current battery charging. 
Inventory from our Authorised Distributors
            
Related Products

UMFT200XD - FT200XD based USB to I2C Breakout Module

For more information on these modules click here



© Future Technology Devices International Ltd.